24
21.
DISPLAYED MESSAGES
DISPLAYED MESSAGE
POSSIBLE CAUSE
SOLUTION
FILL TANK WITH FRESH
WATER
Insufficient water in the tank (A16).
Fill the tank with water and/or insert it cor-
rectly, pushing it as far as it will go until it
clicks into place.
INSERT WATER TANK
The tank (A16) is not correctly in place.
Insert the tank correctly and press as far as it
will go.
EMPTY GROUNDS CONTAINER
The grounds container (A10) is full.
Empty the grounds container and drip tray
(A14), clean and replace. Important: when
removing the drip tray, the grounds container
must be emptied, even if it contains few groun-
ds. If this is not done, when you make the next
coffees, the grounds container may fill up more
than expected and clog the machine.
INSERT GROUNDS CONTAINER
After cleaning, the grounds container has not
been replaced (A10).
Remove the drip tray (A14) and insert the
grounds container.
ADD GROUND COFFEE MAX.
ONE MEASURE
ESC
The pre-ground coffee function has been se-
lected without placing any “pre-ground coffee”
in the funnel (A4).
Place pre-ground coffee in the funnel (fig. 13)
and repeat delivery.
Summary of Contents for ECAM65X.55
Page 1: ...ECAM65X 55 BEAN TO CUP ESPRESSO AND CAPPUCCINO MACHINE Instruction for use...
Page 3: ...3 A A5 A2 A1 A4 A7 A3 B A6 A9 A8 A19 A10 A11 A13 A12 A15 A16 A17 A21 A20 A18 A14...
Page 4: ...4 4 4 3 3 2 1 8 7 6 5 12 16 15 9 14 MILK 5 5 5 11 10 13...
Page 5: ...5 20 18 17 24 23 32 31 21 22 19 CLEAN 25 26 27 28B 28A 29 P U S H 30 P U S H...
