background image

18

Replacing the filter

When “REPLACE FILTER” is displayed, after two months (see date 
indicator) or when the appliance has not been used for 3 weeks, 
you should replace the filter:
1.   Extract the tank and exhausted filter;
2.   Take the new filter out of its packet and proceed as illustra-

ted in points 2-3-4-5-6-7 in the previous section.

3.   Position a container with a minimum capacity of 500 ml 

under the hot water spout.

4.   Press the MENU/ESC button to enter the menu.
5.   Press < or > until “Replace filter” is displayed.
6.   Press the  

 button.

7.   “Confirm?” is displayed.
8.  Press the  

 button to confirm the selection;

9.   “HOT WATER Press OK” is displayed; 
10.  Press the 

 button to confirm the selection. The ap-

pliance begins hot water delivery and the message “Please 
wait” is displayed.

11.  After delivery, the appliance is automatically ready to make 

the next drink. 

The new filter is now active and you can use the coffee machine. 

Removing the filter

If you want to use the appliance without the filter, you must 
remove it and notify the appliance of its removal. Proceed as 
follows:
1.  Extract the tank and exhausted filter;
2.   Press the MENU/ESC button to enter the menu;
3.   Press < or > (fig. 9) until “Install filter, Enabled” is 

displayed;

4.   Press the 

 button;

5.   “Disable?” is displayed; 
6.   Press the  

 button to confirm and the MENU/ESC 

button to exit the menu.

TECHNICAL DATA

Voltage:  

220-240 V~ 50/60 Hz max. 10A

Absorbed power:  

1450W

Pressure:  

15 bar

Max. water tank capacity:  

2 l

Size LxHxD:   

260 x 360 x 460  mm

Cable length:  

1,75 m

Weight:  

11  kg

Coffee beans container capacity:  

400 g

The appliance complies with the following EC 
directives:

•  Low  Voltage  Directive  2006/95/EC  and  subsequent 

amendments;

•  EMC Directive 2004/108/EC and subsequent amendments;
•  European Stand-by Regulation 1275/2008;
•  Materials and accessories coming into contact with food 

conform to EC regulation 1935/2004.

DISPOSAL

  

 

In compliance with European directive 2002/96/EC, 
the appliance must not be disposed of with hou-
sehold waste, but taken to an authorised waste sepa-
ration and recycling centre.

Summary of Contents for ECAM45.32X























Reviews: