background image

14

 To clean (with the machine on):
•  Remove the drip tray (A19) (fig. 25), empty and clean.
•  Empty the grounds container (A15) and clean thoroughly 

to remove all residues left on the bottom. This can be done 
with the spatula on the brush (C5) (if included with your 
model).

•  Check the condensate tray (A16) (red) and empty if 

necessary.

Important! 

When removing the drip tray, the grounds container must be 
emptied, even if it contains few grounds.
If this is not done, when you make the next coffees, the grounds 
container will fill up more than expected and clog the machine.

Please note:

After cleaning, it is normal for the grounds container (A14) to 
contain water.

11.4  Cleaning the drip tray and condensate tray

Important! 

The drip tray (A19) is fitted with a level indicator (A18) (red) 
showing the level of water it contains (fig. 26). Before the in-
dicator protrudes from the cup tray (A17), the drip tray must 
be emptied and cleaned otherwise the water may overflow the 
edge and damage the appliance, the surface it rests on or the 
surrounding area.

To remove the drip tray:
1.  Remove the drip tray and the coffee grounds container 

(A15) (fig. 25);

2.  Empty the drip tray and grounds container and wash them;
3.  Check the red condensate tray (A16) and empty if 

necessary;

4.  Replace the drip tray and grounds container.

11.5  Cleaning the inside of the machine

Danger of electric shock! 

Before cleaning internal parts, the machine must be turned off 
(see section “5. Turning the appliance off”) and unplugged from 
the mains power supply. Never immerse the machine in water.

1.  Check regularly (about once a month) that the inside of the 

appliance (accessible after removing the drip tray, A19) is 
not dirty. If necessary, remove coffee deposits with a brush 
(if included with your model, use the accessory provided 
(C5)) and a sponge;

2.  Remove all residues with a vacuum cleaner (fig. 27).

11.6  Cleaning the water tank

1.  Clean the water tank (A10) regularly (about once a month 

and whenever you replace the water softener filter (C4) (if 

provided) with a damp cloth and a little mild washing up 
liquid;

2.  Remove the filter (C4) (if present) and rinse with running 

water;

3.  Replace the filter (if installed), fill the tank with fresh water 

and replace;

4.  (Models with water softener filter only) Deliver about 

100ml of water.

11.7  Cleaning the coffee spouts

1.  Clean the coffee spouts (A14) regularly with a sponge or 

cloth (fig. 28A);

2.  Check the holes in the coffee spouts are not blocked. If nec-

essary, remove coffee deposits with a toothpick (fig. 28B).

11.8  Cleaning the pre-ground coffee funnel

Check regularly (about once a month) that the pre-ground 
coffee funnel (A6) is not blocked. If necessary, remove coffee 
deposits with a brush (if included with your model, use the ac-
cessory provided (C5)).

11.9  Cleaning the infuser

The infuser (A11) must be cleaned at least once a month.

Important! 

The infuser cannot be extracted when the machine is on. 
1.  Make sure the machine is correctly turned off (see section 

“5. Turning the appliance off”);

2.  Remove the water tank (A10);
3.  Open the infuser door (A11) (fig. 28) on the right side of 

the appliance;

4.  Press the two coloured release buttons inwards and at the 

same time pull the infuser outwards (fig. 29);

5.  Soak the infuser in water for about 5 minutes, then rinse 

under the tap;

Important!  

RINSE WITH WATER ONLY 
NO WASHING UP LIQUID - NO DISHWASHER
Clean the infuser without using washing up liquid as it could 
be damaged.
6.  Use a brush (if included with your model, use the accessory 

provided (C5)) to remove any coffee residues left in the in-
fuser housing, visible through the infuser door;

7.  After cleaning, replace the infuser by sliding it onto the 

internal support, then push the PUSH symbol fully in until 
it clicks into place;

Please note: 

If the infuser is difficult to insert, before insertion, adapt it to the 
right size by pressing the two levers (fig. 30).
8.  Once inserted, make sure the two coloured buttons have 

snapped out;

9.  Close the infuser door;

Summary of Contents for ECAM23.46 Series























Reviews: