36
LIGHTS DISPLAYED
POSSIBLE CAUSE
REMEDY
FLASHING
The grinding is too fine and the coffee is
delivered too slowly or not at all
Repeat coffee delivery and turn the grinding
adjustment dial (A5) (fig. 13) one click clockwise
towards "7" while the coffee mill is in operation.
If after making at least 2 coffees delivery is still
too slow, repeat the correction procedure, turn-
ing the grinding adjustment dial another click
until delivery is correct (see section “15.2 Adjust-
ing the coffee mill”). If the problem persists, turn
the steam/hot water dial (A21) to the I position
and let some water run from the cappuccino
maker (A18).
If the water softener filter (C4) is present,
an air bubble may have been released in-
side the circuit, obstructing delivery
Deliver a little water from the cappuccino maker
(A18) by turning the steam/hot water dial (A21)
to the I position until the flow is regular (fig. 5).
FLASHING
The coffee beans have run out
Fill the beans container (A3 - fig. 14).
FLASHING
ON
The pre-ground coffee function has been
selected without placing any pre-ground
coffee in the funnel (A4)
Place pre-ground coffee in the funnel (fig. 17) or
deselect the "pre-ground" function.
The pre-ground coffee funnel (A4) is
clogged
Empty the funnel with the help of a brush as de-
scribed in section “19.8 Cleaning the pre-ground
coffee funnel”.
FLASHING
The machine must be descaled
The descaling procedure described in section
“20. Descaling” needs to be performed.
FLASHING
Too much coffee has been used
Select a milder taste by turning the dial (B6)
anticlockwise.
The water circuit is empty
Turn the steam/hot water dial (A21) to the
I
posi-
tion until delivery stops, then bring it back to the
0
position. If the alarm occurs while hot water
or steam is being delivered, turn the dial to the
0
position. Turn the steam/hot water dial to the
I
position until delivery stops, then bring it back to
the
0
position. If the problem persists, make sure
the water tank (A7) is fully inserted.
→
