background image

17

FLASHING

The machine must be descaled. 

The descaling procedure described in the sec-
tion “Descaling” needs to be performed as soon 
as possible.

FLASHING

Too much coffee has been used.

Select a milder taste or reduce the quantity of 
pre-ground coffee then make the coffee again.

 

FLASHING

The coffee beans have run out.

Fill the beans container

The pre-ground coffee funnel is 
clogged.

Empty the funnel with the help of a knife as 
described in the section "Cleaning the pre-
ground coffee funnel".

FLASHING

The infuser has not been replaced 
after cleaning. 

Insert the infuser as described in the section 
“Cleaning the infuser”. 

The inside of the appliance is very 
dirty.

Clean the inside of the appliance thoroughly, 
as described in the section “Cleaning and 
maintenance”.  
If the message is still displayed after cleaning, 
contact a customer services.

TROUBLESHOOTING

Below is a list of some of the possible malfunctions.  

PROBLEM

POSSIBLE CAUSE

REMEDY

The coffee is not hot 

The cups were not preheated.

Warm the cups by rinsing them with hot water 
(Please note you can use the hot water or rinse 
function). 

The infuser has cooled down because 2/3 mi-
nutes have elapsed since the last coffee was 
made. 

Before making the coffee, warm the infuser by 
pressing the rinse button 

  .

The coffee is thin or not cre-
amy enough. 

The coffee is ground too coarsely.

Turn the grinding adjustment dial one click an-
ticlockwise while the coffee mill is in operation 
(fig. 8). 
Continue one click at a time until coffee delive-
ry is satisfactory. The effect is only visible after 
delivering two coffees (see the section: “Adju-
sting the coffee mill” on page 11).

The coffee is unsuitable. 

Use pre-ground coffee for espresso coffee 
makers.

Summary of Contents for ECAM21.11X





















Reviews: