background image

13

4.  (Models with water softener filter only) Deliver about 100 

ml of water.

Danger!

While cleaning, never immerse the coffee maker in water. It is 
an electrical appliance.

14.7  Descale

Descale the appliance when the orange light on the 

 but-

ton flashes.

Important! 

•  Before use, read the instructions and the labelling on the 

descaler pack.

•  You should use De'Longhi descaler only. Using unsuitable 

descaler and/or performing descaling incorrectly may re-
sult in faults not covered by the manufacturer's guarantee.

Proceed as follows:
1.  (IF PRESENT, REMOVE THE WATER SOFTENER FILTER). Fill 

the tank with the descaler solution, obtained by diluting 
the descaler provided with water (fill the water tank up to 
the MAX level).

2.  Press the ON/OFF button.

25

3.  Make sure the filter holder is not attached and position a 

recipient under the hot water spout and boiler outlet (A5) 
(fig. 25).

4.  Wait for the 

 and 

 lights to come on steadily, 

indicating that the appliance is ready for use.

5.  Press and hold the 

 button for 10 seconds until the 

three buttons flash in sequence.

6.  Turn the steam dial to the 

 position.

7.  Press the 

 button to start descaling.

8.  The descale programme starts and the descaler liquid 

comes out of the water spout. The descale programme 
removes limescale deposits from inside the appliance by 
automatically performing a series of rinses and pauses 
until the tank is completely empty.

 Please note: 

During descaling, to clean the boiler outlet, close the steam dial 
from time to time to deliver small quantities of descaler from 
the boiler outlet.
9.  The appliance stops operation and the orange 

 

light continues to flash, indicating that descaling is still 
underway.

10.  The appliance is now ready for rinsing through with clean 

water. Extract the water tank, empty, rinse under running 
water, fill with fresh water up to the MAX level and put 
back in the appliance (If used, insert the water softener 
filter).

11.  Empty the container used to collect the descaler solution 

and replace it empty under the hot water spout.

12.  Make sure the steam dial is in the 

 position, then 

press the 

 button to start rinsing.

 Please note: 

During rinsing, to clean the boiler outlet, close the steam dial 
from time to time to deliver small quantities of water from the 
boiler outlet.
13.  When the water tank is empty, the orange light goes out 

and descaling is complete.

14.  Make sure the steam dial is in the closed position (

 

symbol).

The appliance is ready for use.

 Please note! 

•  If the descaling cycle is not completed correctly (e.g. no 

electricity) we recommend repeating the cycle;

• 

If the water tank has not been filled to the MAX level, at the 
end of descaling, the appliance requests a further rinse to 
guarantee that the descaler solution has been completely 
eliminated from the machine's internal circuits.

Repair of damage to the coffee maker caused by limescale is not 
covered by the guarantee unless descaling is performed regular-
ly as described above.

Summary of Contents for EC 685












Reviews: