DeLonghi DSBSDX19G, Installation Instructions Manual

Page: 15 / 36

GB
installing the water tank
• Insert the valve of the water tank into the hole
of the water dispenser and push down the water
tank to attach securely with the water dispenser.
• To remove the water tank, hold firmly on both
sides and bottom of the water tank then push
up.
Be careful not to press on the valve.
Valve
cleaning before use
Wipe the inside of the unit with a weak solution of bicarbonate soda. Then rinse with warm water
using a sponge or cloth. Wipe completely dry before replacing the drawers. Clean the exterior of
the unit with a damp cloth.
If you require more information refer to the
Cleaning section.
before using your unit
Before placing any food in your unit, turn it on and wait for 24 hours, to make sure it is working
properly and to allow it time to fall to the correct temperature. Your unit should not be overfilled.
• Before Plugging in YOU MUST
Check that you have a socket which is compatible with the plug supplied with the unit.
•
Before Turning On!
Do not turn on until two hours after moving the unit. The coolant fluid needs time to
settle.
15
installation
DSBSDX19G_IB_2L_190426_grace.indb 15 26/4/2019 8:38 PM