20
FASTENING THE COOKTOP
Each cooktop is supplied with a set of tabs and screws to fasten it on units with a work-
ing surface from 3 to 4 cm deep.
The kit includes 4 tabs
A
and 4 self-threading screws
B
(fig. 4.4).
• Cut the unit.
• Turn the hob upside down and rest the glass side on a cloth.
• Spread the seal
C
around the edge of the hob (fig. 4.5).
• Put tabs
A
into the mountings; only tighten screws
B
a few turns.
Make sure that the tabs are mounted correctly as shown in the figure 4.4.
• Put the cooktop into the hole cut into the unit and position it correctly.
• Put tabs
A
into place, tooth
D
of the tabs should go into the hole.
• Tighten screws
B
until the cooktop is completely secured.
• Using a sharp tool cut off the part of gasket
C
which protrudes from the cooktop. Take
care not to damage the workbench.
A
A
C
C
Adhesive side
Fig. 4.5
30 mm min.
40 mm max.
A
D
B
C
Fig. 4.4
Summary of Contents for Domino DE302IB
Page 17: ...17 ADVICE FOR THE INSTALLER...
Page 24: ...cod 1103762 1...
