DeLonghi DFC60W16, Installation Instructions Manual

Page: 10 / 32

GB
• Ensure the unit is unplugged and empty.
• To take the door off it is necessary to tilt the unit backwards. You should rest the unit on
something solid, e.g. a chair just below the top panel.
• All parts removed must be saved to do the reinstallation of the door.
• Do not lay the unit flat as this may damage the coolant system.
• We recommend that 2 people handle the unit during assembly.
• If you want to have the door swing reversed, we recommend that you contact a
qualified technician. You should only try to reverse the door yourself if you believe that
you are qualified to do so.
reversing the door swing
tools required: Philips style screwdriver / Flat bladed screwdriver / Hexagonal spanner
1. Remove all fridge door shelves from the
upper door. Remove the upper cover,
upper corner cover and upper door corner
block.
2. Remove the upper hinge cover, screws
and upper hinge. Lift the upper door and
place it on a padded surface to prevent
from being scratched.
3. Remove the stopper from the bottom of
the upper door and move it to the opposite
side. Screw tightly. Remove also the upper
door stop block. For the opposite side, use
another stop block and screw tightly.
Upper corner cover has left and right
side. There is the letter “L” and “R”
at the back to identify which side it
belongs to. The upper corner cover
packed as an accessory is for the right
side.
Upper door stop block has left and
right side. The upper door stop block
packed as an accessory is for the left
side.
Upper hinge cover has left and right
side. The upper hinge cover packed as
an accessory is for the left side.
10
installation
DFC60W_X16_IB_2L_160407_grace.indb 10 7/4/16 6:19 pm