manualshive.com logo in svg

DeLonghi DEP909P, Installation And Service Instructions Use And Care Instructions

Share
Download
DeLonghi DEP909P Installation And Service Instructions Use And Care Instructions Download Page 46

46

TROUBLESHOOTING

If there is a problem, check the chart below to see if you can fix it. If the problem cannot be 

fixed or persists, call your Authorised Repairer or Customer Care.

Problem

Possible causes

What to do

General

The oven does not work.

No power.

Check that the mains power 
supply (wall switch) is 
turned on and there is no 
power outage in your area.

The lights do not come 
on when I open the oven 
door.

The oven light bulb(s) have 
blown.

Replace the light bulb(s).
See ‘Care and cleaning’ for 
instructions.

The door is not correctly 

fitted.

See ‘Care and cleaning’ for 

instructions  on  fitting  the 

door correctly.

The oven is in Sabbath 
setting and the ‘Light off’ 
option has been saved.

To quit Sabbath setting, 
press and hold the cancel 

 button. See ‘User 

preference settings’ for 
instructions on changing the 
‘Light off’ option.

The temperature indicator 
shows

 - - - 

and the 

dials and buttons are 
unresponsive.

The control panel is locked.

Press and hold the select 

 or cancel 

 button to 

unlock the control panel.

The oven is not heating

The door is not properly 
closed or it is opened too 
frequently during cooking.

The heating elements are 
disabled while the door is 
open.
Make sure the door is 
properly closed and avoid 
opening it frequently during 
cooking.

A glass pane in the 
oven door has cracked, 
chipped, or shattered.

Incorrect cleaning or the 
edge of the glass hitting 
against something.

You must NOT use the 
oven.
Call your Authorised 
Repairer or Customer Care.

Summary of Contents for DEP909P





















































Reviews:

No comments

Brands by name

Popular brands

Load more brands