16
Fixing screw
Stud
Figure 10
Figure 11
Figure 9
TILTING GRILL (BOTTOM MAIN OVEN ONLY)
■
The grill is secured to the rear wall of the ovens on a hinge system that
allows it to be lowered to allow proper access when cleaning the oven
ceiling (fig. 11).
■
To lower the grill element: use a flat-head screwdriver or a small coin to
loosen the element fixing screw (fig. 10).
■
When you have finished cleaning the oven ceiling, raise the grill element and screw the
element fixing screw back onto the stud. Make sure that the fixing screw is tightened
and the element is held securely in place.
■
The grill element itself is self-cleaning.
GREASE FILTER
■
A special screen is
provided at the back of
the ovens to catch grease
particles, mainly when
meat is being roasted (fig.
9).
■
Clean the filters after any cooking!
The grease filters can be removed
for cleaning and should be washed
regularly in hot soapy water (fig. 9).
■
Always dry the filters properly before
fitting it back into the ovens.
CAUTION:
When baking pastry etc. this
filter should be removed.