OPERATING YOUR COFFEE MAKER
PREPARING COFFEE MAKER FOR BREWING COFFEE:
1.
Place the coffee maker on a flat, level surface away from any edge.
2.
Plug the unit into a 120V / 60Hz only outlet.
3.
The lids of the carafes must be fitted properly during the brewing process.
And the carafes must be set on the non-stick plates.
FILLING THE WATER RESERVOIR:
4.
Open the hinged water reservoir cover located at the top of the coffee maker.
5.
Fill the carafe with cold water corresponding to the desired cups of coffee you
will be brewing. Markings on the inside of the reservoir indicate the level of
water.
6. Empty the water from the carafe into the water reservoir, located behind the
filter basket holders. Fill the left side of the reservoir for the left-hand side of
the coffee maker. Fill the right side of the reservoir for the right-hand side of
the coffee maker. If you will be using the “Dual Carafe Function” fill both sides
of the reservoir.
NOTE:
The automatic brewing system has been designed to
work with cold water only.
6.
Press the ON/OFF button to reset the machine.
IMPORTANT:
If the unit is not allowed to cool before immediate repeated use,
water placed in the water reservoir may become overheated and a spray of
steam could be released from opening, causing a burn risk.
SETTING THE TIMER
(continued)
-9-
