4
introDUCtion
Thank you for choosing a De’Longhi Ceramic fan heater.
Please take a few minutes to read these instructions.
This will avoid all risks and damage to the appliance.
important SaFEGUarDS
- To avoid risk of cable overheating, extension leads must
not be used in powering this appliance.
- Do not use this heater near showers, bathtubs, sinks,
swimming pools, etc.
- Always use the heater in an upright position.
- Do not use the heater to dry laundry. Never obstruct the
intake and outlet grilles (danger of overheating).
- The appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not
play with the appliance.
- If the power cable is damaged, it must be replaced by
the manufacturer. Please contact Customer Experience,
see enclosed guarantee.
- The appliance must not be placed immediately under a
fixed power socket.
- The heater must be positioned at least 50 cm from
furniture or other objects. Do not use the appliance in
rooms with a floor area of less than 4 m².
- Before storing the appliance, check it is completely off
and the cable is unplugged. At this point wrap the cord
around the base.
- Do not store in a dusty room.
- The room temperature should be between 0-30°C.
- The heater is fitted with a thermal cutout device which
switches the heater off in case of accidental overheating
(eg. obstruction of air intake and outlet grilles, motor
turning slowly or not at all). To reset, unplug the
appliance from the mains socket for a few minutes,
remove the cause of overheating then plug in again.
important:
To avoid overheating, never under
any circumstances cover the appliance during
operation as this would lead to a dangerous rise in
temperature.
WarninG:
to avoid the safety system resetting accidentally,
this appliance must not be powered through an external on/
off device such as a timer, or connected to a circuit which is
turned off and on regularly by the energy supplier.
Safety functions
-
Safety device:
the appliance is fitted with a safety
device which switches it off in the event of accidental
overheating (e.g. obstruction of air intake and outlet
grilles, motor turning slowly or not at all).
To reset, unplug the appliance from the mains socket for
a few minutes, remove the cause of overheating then
plug in again.
-
tip over safety device:
a tip over safety device (
D
)
turns the appliance off if it falls over or is positioned
inappropriately in such a way as to jeopardise safety.
When the appliance is placed back in a vertical position
it starts again automatically.
Disposing of the appliance
In compliance with European directive 2002/96/EC,
the appliance must not be disposed of with house-
hold waste, but taken to an authorised waste separa-
tion and recycling centre.
important safeguards
