17
installation
GB
An additional space (approximately 120mm) is required at the rear of the machine. This
is to allow enough space for the water hose and drain hose connections.
installing your washer dryer
Please Read And Follow The Instructions Carefully.
• In addition to the instructions mentioned here, special regulations of the relevant water and
power supply companies may apply. If in doubt, have the machine connected by a qualified
technician.
• The machine is heavy - caution when lifting it. Do not lift by projecting components (e.g.
machine door).
• Warning: Frozen hoses may tear/burst. Do not install machine in outdoor areas or where
there is a risk of frost.
• Lay hoses and cables in such a way that there is no risk of tripping over them.
installation
choosing the right location for your washer dryer
• Make sure there’s enough space for your machine.
• Install your machine on a flat, stable surface to avoid excessive vibrations and noise.
• Don’t install your machine in direct sunlight or in a place where temperatures can reach
freezing.
• The ventilation openings in the base of the machine must not be obstructed by carpet.
• Start by tilting the machine backwards.
• One person should stand behind it, holding the rear of the top panel. The other person
should grip the bottom feet at the front.
• Check that you have all the required accessories for installation.
• We recommend that you entrust the installation of the machine to a qualified technician.
Two or more people are required to move
the machine.
Ò
Ò
Ò
Sloping
surface
Unstable
Bumpy
surface
x
Sloping
surface
x
Unstable
x
Bumpy
surface
D8W6D19_IB_2L_RC_190322.indb 17
22/3/2019 4:06 PM
