background image

11

•  increase the coffee temperature (see section “9. Setting the 

temperature”).

12.4  Coffee delivery

 Important! 

Do not use green, caramelised or candied coffee beans as they 
could stick to the coffee mill and make it unusable.

1.  Fill the container (A4) with coffee beans (fig. 14);
2.  Place under the coffee spouts (A11):
 

- 1 cup, to make 1 coffee (fig. 15);

 

- 2 cups, to make 2 coffees.

3.  Lower the spouts as near as possible to the cup. This makes 

a creamier coffee (fig. 16);

4.  Then select your required coffee:

Recipe

Quantity

Programma-

ble quantity

≃ 

40 ml

from 

20 to 

≃ 

120ml

≃ 

40 ml + 40 ml

from 

40 to 

≃ 

240ml

≃ 

180 ml

from 

100 to 

≃ 

240ml

*

≃ 

160 ml

from 

115 to 

≃ 

250cc

*

≃ 

120 ml

from 

≃ 

80 to 

≃ 

180 ml

(* Varies according to model)

5.  Preparation begins and the light corresponding to the se-

lected button flashes on the control panel (B).

 Please note: 

•  While the appliance is making coffee, the flow can be 

interrupted at any moment by pressing one of the coffee 

buttons.

•  At the end of delivery, to increase the quantity of coffee 

in the cup, just press one of the coffee icons (within 3 

seconds).

Once the coffee has been made, the appliance is ready to make 
the next beverage.

 Please note:

•  Indicator lights may appear on the control panel (B) during 

use. Their meaning is given in section “20. Explanation of 

lights”. 

•  For hotter coffee, see section “12.3 Tips for a hotter coffee”.

•  If the coffee is delivered a drop at a time, too weak and not 

creamy enough or too cold, read the tips in section “21. 

Troubleshooting”.

13.  MAKING COFFEE USING PRE-GROUND COFFEE

 Important!  

•  Never place coffee beans in the pre-ground coffee funnel 

as this could damage the appliance.

•  Never add pre-ground coffee when the machine is off or it 

could spread through the inside of the machine and dirty 

it. This could damage the machine.

•  Never use more than 1 level meas-

ure (C2) as it could soil the inside 

of the coffee machine or block the 

funnel (A4).  Given the quantity of 

coffee used, it is not advisable to prepare “

 2x Es-

presso” (B3), “

 Coffee” (B8) or (certain models only) 

 ” (B9).

 Please note:

When using pre-ground coffee, only one cup can be made at a 
time.
1.  Make sure the appliance is on;
2.  Turn the coffee taste selection dial (B6) anticlockwise as far 

as it will go, to the 

 position.

3.  Make sure the funnel (A4) is not blocked, then add one 

level measure (C2) of pre-ground coffee (fig. 17).

4.  Place a cup under the coffee spouts (A11).
5.  Press the required 1 cup button .
6.  Preparation begins.

 Important!  Making “

 Long”

 coffee 

(B9) (certain 

models only)

:

Halfway through preparation, delivery stops, the 

 light 

comes on and the 

 light flashes. Add one level measure of 

pre-ground coffee and press the “

 Long” button.

 Please note:

If "Energy Saving" mode is active, you may have to wait a few 
seconds before the first coffee is delivered.

13.1  Selecting the quantity in the cup

To change the quantity of coffee the appliance delivers auto-
matically into the cup, proceed as described below:

Summary of Contents for 132213166














Reviews: