English
Safety instructions
• Protect the product against moisture
• Protect the product against direct sunlight
• Do not look directly into the LED diode of the scanner
Beep tones
Three short beeps
Scanner is active
Two short beeps
Scanner reads successful codes
One long beep
Scanner switches off
Reset to factory settings
To reset the unit to factory settings, please scan the code below.
The device will then be set as a USB keyboard.
USB Connection
With the code below you can set the scanner as a USB keyboard.
If the system asks for a serial port (USB Com) please scan the
following code and install the driver manually.
Scan Mode
You can choose between three different modes.
The Trigger Mode, in which the scan is performed exclusively by
pressing a button.
The autosense mode, where the scanner lights up automatically
whenever a barcode is presented.
And the continuous mode, where the scanner is active and lit all
the time.
Sound settings
The scanner can be set to two different tone
settings.
On
Off
Compensating light
Light on
Light off
LED Light settings
LED on
LED off
German language setting
Before the first use, please scan the codes below -
step by step, to confirm the German keyboard.
1.
2.
