Settings End characters
Add CR
Add LF
Add CR + LF
Cancel CR + LF
Add TAB
Transmission speed
Select the appropriate transmission speed according to the PC reception speed.
fast
medium
slow
•
very slow
If not set otherwise, the scanned barcodes are displayed directly on the output
device.
Data transfer from the save mode
If you are outside the transmission range to your Bluetooth device, the scanned
codes are automatically stored in the internal memory. If the internal memory is
full, you will hear three short beeps.
Use the code below to enter the internal storage mode.
The total amount of the memory is registered by the following barcode
You can now upload the stored data by scanning the barcode below
Please make sure that you are in the reception area of your USB device and that
an ideal connection has been established. Otherwise, please use the enclosed
USB cable for data transfer.
To delete the internal memory afterwards you can use the following code
Return to normal mode
