-3-
English
Cable Tester Operation
The Cable Tester can test twisted pair cables and will identify wrong connections,
short circuit and open circuit.
Connect one end of a LAN cable into the RJ45 (or RJ11) port of the main unit,
and the other end into the removable remote unit of the tester. Turn the tester on
by switching to ON for normal speed or S for slow speed testing. The LEDs will
turn on sequentially as below:
Master Tester: 1-2-3-4-5-6-7-8-G
Remote Tester: 1-2-3-4-5-6-7-8-G
If one wire has an open circuit, the light will not turn on.
If the wiring is disordered (e.g. wires 2 and 4 crossed), then the display will
change:
Master Tester: 1-2-3-4-5-6-7-8-G
Remote Tester: 1-4-3-2-5-6-7-8-G
If two or more cables are short circuited, the corresponding LEDs won't light on
the remote unit while the main tester remains normal.
Support Delock
If you have further questions, please contact our customer support
You can find current product information on our homepage: www.delock.com
Final clause
Information and data contained in this manual are subject to change without
notice in advance. Errors and misprints excepted.
Copyright
No part of this user manual may be reproduced, or transmitted for any purpose,
regardless in which way or by any means, electronically or mechanically, without
explicit written approval of Delock.
Edition: 07/2022
