View, hold and save readings
Change material/species
Adjust alarm set point
Set material temperature (applicable meters only)
Set insulated vs. non-insulated pins
(applicable meters only)
READ
Save up to 100 readings
Saved readings contain material type,
reading value, material temp, and pin type
View average, high and low values
View last 10 readings
STATS
Calibration Check: 12.0 +/- 0.2
Temperature Units: °F/°C
Meter Timeout: 1/4/10 minutes
Bluetooth
®
: ON/OFF
Display Brightness: 1-10
Backlight: ON/OFF/AUTO
Display Contrast: 1-10
SET
Your Meter
Components
1) Display
Large, easy to read under all conditions
2) Read Button
Press from any screen to enter live
reading mode
Press again to toggle between live
and held reading
3) Navigation Buttons
Move between and down into the
READ, SET and STATS menus
Center button to save readings
or changes to settings
4) Easy-grip Handle
Easily push pins into material
5) Colored LEDs
Red, yellow, and green LEDs show the
relative moisture status
Adjustable within the Delmhorst EDGE
TM
App
6) Ambient Light Sensor
Turns backlight on and off in Auto
Backlight mode
7) Pins (applicable meters only)
Insert integral pins up to 5/16” into material
to take reading
8) Electrode Connector
Connect with any Delmhorst
electrode to extend functionality
Display
Read Button
Navigation
Buttons
Pins &
Pin Cap
Light
Sensor
7
LEDs
Electrode Connector
& Electrode Cap
Easy-grip
Handle
Bluetooth
®
Indicator *
• Solid
- On and connected
• Blinking
- On and seeking connection
• None
- Off
Read Adjustments
Up/down to move between
Read screen settings
Left/right buttons to
adjust value
Selection Arrows
Left/right to adjust
when blinking
Center/down to enter
current selection
1
2
3
4
5
6
7
8
6
5
8
1
2
3
4
