Dellmeco DME 15 R Series, Instruction Manual

Page: 37 / 66

37I DELLMECO I EODD DIAPHRAGM PUMPS
12. Main body specification
12.1. Main specification
12.2. Appearance and dimensions
– DME Plastic Series (PE conductive, PTFE conductive)
Pump size A B C D
E
(suction)
F
(discharge)
H I
Ø
J K L M N O
Ø
P
DME 15 R.., Z.. 625 376 235 25
G ½”
G
½”
217 18 30 112 334 220 202 18 30
DME 25 R.., Z.. 739 474 312 35
G 1” G 1”
287 28 40 140 407 200 229 28 40
DME 40 R.., Z.. 819 595 426 42
G 1 ½” G 1 ½”
388 30 60 190 507 280 288 28 40
DME 50 R.., Z.. 1046 686 540 40
G 2 ½” G 2”
485 30 60 280 582 420 356 30 60
DME 80 R.. 1266 926 800 87
G 3” G 3”
690 40 75 395 841 645 542 40 75
!
WARNING
!
CAUTION
!
CAUTION

It is the end-user responsibility to thoroughly wash and clean the pump to prevent any damages caused by
accidental liquid leaks.

Be sure to maintain the transport safety by preventing any liquid leaks from the pump.

Due to constant improvement or modification of our products, dimensions given can be changed without prior
information. Please contact your dealer or our office for details.

Gearmotor unit can be selected in accordance with customer’s request (in a limited scope). However, this may
change the final appearance and dimensions of the DME Pump. Before the purchase, please request for the
dimensional drawing to confirm the DME Seri
es Pump’s compliance with your requirements.
Estimated tolerance
of the dimensions on the assembled pump is ±3 mm.

Due to constant improvement or modification of our products, dimensions given can be changed without prior
information. Please contact your dealer or our office for details.


