DELLA 048-GM-48293 User Manual Download Page 6

 

   

DANGER 

                                               

1.  Remove the exterior and interior packaging, Then check all the accessories are included. If any parts 

are missing, please contact our customer service. 

2.  Remove all the tapes on the unit. Open the transparent window, take out the accessory parts inside. 

3.  Clean the interior (such as water reservoir, Ice cube pushing spring etc.) with lukewarm water and a 

soft cloth.   

4.  Locating your ice maker on a level counter table far from direct sunlight and other sources of heat 

(i.e.: stove, furnace, radiator). Maker sure that there is at least 6 inches between the back and sides 

of your ice maker with the wall. 

5.  Allow one hour for the refrigerant fluid to settle down before plugging your ice maker in. 

6.  The power plug must be accessible directly. 

WARNING: fill with potable water only. Only use drinking water. 

 

     

 

*Improper use of the grounded plug can result in the risk of electrical shock.    If the power cord 

is damaged please call our customer service. 

1.  This unit should be properly grounded for your safety. The power cord of this appliance is equipped 

with a grounding plug which mates with standard grounding wall outlets to minimize the possibility of 

electric shock. 

2.  Plug  your  appliance  into  an  exclusive,  properly  installed,  grounding  wall  outlet.  Do  not  under  any 

circumstances, damage the grounding means of the plug. Any questions concerning power and/or 

grounding should be directed toward a certified electrician. 

3.  This appliance requires a standard 110-120Volt, 60Hz electrical outlet with good grounding means. 

 

 

Before using your ice maker, it is strongly recommended to clean it thoroughly.   

Unplug the unit before cleaning or making any maintenance. 

1.  Take out the accessory parts under top window. 

2.  Clean the interior with diluted detergent, warm water and a soft cloth. First pour the warm water with 

diluted detergent into the internal water reservoir and the space below the transparent window, then 

use the soft cloth to wipe the surface. 

3.  Again use the water to rinse the inside parts, and drain out the water by unplugging the drain cap on 

the bottom. 

4.  The outside of the ice maker should be cleaned regularly with a mild detergent solution and warm 

water. 

5.  Dry the interior and exterior with a soft cloth. 

6.  When the machine is not in use for a long time, open water drain cap to drain out water completely 

from water reservoir. 

OPERATING PROCEDURES & MAINTENANCE

 

CONNECTING YOUR ICE MAKER 

UNPACKING YOUR ICE MAKER 

CLEANING AND MAINTAINING YOUR ICE MAKER 

Summary of Contents for 048-GM-48293












Reviews: