Dell XPS 17 9700, Service Manual

Page: 61 / 74

Table 6. System setup options—Integrated Devices menu(continued)
Integrated Devices
Enable Fingerprint Reader Single Sign On Enables or disables the Fingerprint Reader Single Sign On capability.
By default, Enable Fingerprint Reader Single Sign On is selected.
Table 7. System setup options—Storage menu
Storage
SATA Operation Configures operating mode of the integrated SATA hard drive controller.
Default: RAID On. SATA is configured to support RAID (Intel Rapid Restore
Technology).
Storage Interface
Port Enablement Enables the selected onboard drives.
• SATA-4
Default: ON
• M.2 PCIe SSD-0
Default: ON
• M.2 PCIe SSD-1
Default: ON
Drive Information Displays the information of various onboard drives.
Enable SMART Reporting Enables or disables Self-Monitoring, Analysis, and Reporting Technology (SMART).
Default: OFF
Enable MediaCard Enables to switch all media cards On/Off or set the media card to read-only state.
By default, Enable Secure Digital (SD) Card is selected.
Table 8. System setup options—Display menu
Display
Display Brightness
Brightness on battery power Sets the screen brightness when the computer is running on battery power.
Default: 50
Brightness on AC power Sets the screen brightness when the computer is running on AC power.
Default: 0
Touch Screen Enables or disables the touch screen for the OS.
NOTE: The touch screen will always work in the BIOS setup irrespective
of this setting.
Full Screen Logo Enabled or disabled the computer to display full screen logo if the image match
screen resolution.
Default: OFF
Direct Graphics Controller Direct
Output Mode When enabled, all graphics output ports directly to the Graphics Processing Unit
(GPU), bypassing Intel Integrated graphics outputs for HDMI, Thunderbolt, and mDP
ports.
Default: OFF
System setup 61