Installing WES7p Firmware
9
Figure 8 Configuration options
3.
Select the
Configure the USB key to Copy/Pull or to Update/Push firmware
option,
and then click
Next
to open the
Select the Configuration
dialog box.
Figure 9 Update firmware options - Windows Embedded Standard 7 P
4.
Select the
Windows Embedded Standard 7 P
operating system (OS) type option.
5.
Select the
Update or Push Firmware
operation to perform option. Be sure that all
three contents options are selected (
OS Image
,
BIOS
, and
CMOS
).
6.
Clear/uncheck the
Preserve data partition
check box.
CAUTION
:
Details for Thin Clients Currently Using Multiple Data Partitions
:
Your existing custom data partition will not work with the WES7p firmware and you
must rebuild your custom data partition after you convert to WES7p. Although the
Preserve data partition
check box is automatically selected to preserve any existing
custom data partition you may have on the thin client (useful for same firmware
platform upgrading use cases), be sure to clear/uncheck the check box to remove
the existing data in the custom data partition.
7.
Click
Next
to open the browse dialog box.
