NOTE:
The server certificate text box for LEAP and PEAP supports a maximum of approximately 127 characters, and
supports multiple server names.
h. To configure EAP-GTC, enter the username only. The password or PIN is required when authenticating.
To configure EAP-MSCHAPv2, enter the username, password and domain.
Important: The domain/username in the username box is supported, but you must leave the domain box blank.
The CA certificate must be installed on the thin client and the server certificate is forced to be validated. When EAP-
MSCCHAPV2 is selected in EAP type in the
Authentication Properties
dialog box (for PEEP IEEE802.1x authentication), an
option to hide the domain is available for selection. Username and Password boxes are available for use, but the
Domain
text
box is disabled.
3.
Click
OK
to save the settings.
Configuring the WLAN Settings
1.
From the desktop menu, click
System Setup
, and then click
Network Setup
.
The
Network Setup
dialog box is displayed.
2.
Click the
WLAN
tab, and use the following guidelines:
a.
Add
— Use this option to add and configure a new SSID connection.
You can configure the SSID connection from the available security type options.
13
