Dell W2606C, Service Manual

Page: 16 / 105

Dell W2606C
15
Setting an access Code
After you enter the parental Control menu for the first time, you can set your own four-digit access code. If for any
reason you lose or forget you access code, you can use the default code.
1. In the parental control menu, select change code.
2. Using the number pad on the remote control, enter a new access code.
3. Select Exit.
TV Menu Setup
TV Menu Setup allows you to adjust the appearance of the TV menu, to change the language of the TV menu and to
restore factory setting.
Use the TV menu setting menu you can select TV Button lock to lock the TV menu and the side panel buttons, when
this option is enabled, only the power button functions. To unlock the TV menu and side panel buttons:
1. Press the menu button on the TV.A message appears stating that the TV is locked.
2. While the message is on the TV, press the channel up and volume increase button simultaneously.
If you are using the DVI connector, you may need to verify the following settings:
Source — The default setting is Auto. The T V automatically detects if a computer (PC) or video
device is being used. If the image does not display correctly, you can select the source, PC or Video ,
depending on the device you are using.
Color — The default color space is RGB . If the colors are not displaying correctly, you can change
the setting to YUV .
Setting you cable channel
Your TV is set to automatically detect whether you are using an antenna or cable and then set the available channels,
some cable providers use an older cable standard that the TV can not automatically detect. If you have your TV
connected but can only view channels 5 and 6,complete the following steps: