Dell W2600, Owner'S Manual, Page: 30 / 263

Using the On-Screen Display
29
Using the On-Screen Display
Your TV has an on-screen display (OSD) that allows you to select the proper input source, make
adjustments to the image and audio settings, select to view Picture-In-Picture, Picture-Outside-
Picture, and Picture-By-Picture. The OSD also allows you to chose how to view the images when
using the card reader and to make adjustments to the image if you are using the TV as your
computer monitor.
Using Your Remote Control With the OSD
NOTE:
You can access and make selections to the OSD using the volume and channel buttons on the
side panel of the TV or the remote control. Except where noted, this section describes how to use the
OSD with the remote control.
1
To enter the OSD, press the Menu button.
Eight
icons appear along the bottom of the screen.
2
Use the left and right buttons (volume buttons) to move between the icons.
The icon appears highlighted as you move through the menu.
3
To select an option, push the Enter button when the icon is highlighted.
4
In the option menu, use the up and down (channel) buttons to move through the
various settings.
NOTE:
A red arrow appears next to the setting as you navigate through the options. A check mark
appears next to the option that is selected.
MAIN MENU
EXIT
INPUT
SELECT
PICTURE
AUDIO
PIP/POP
PBP
SIZE
SLEEP
TIMER SETUP