10
Dell Networking W-AP270 Series Outdoor Access Point
| Installation Guide
Connecting the Ethernet Cable
To connect the Ethernet cable to the W-AP270 Series access point, perform the following steps using the cable
glands that were shipped with the access point.
Figure 10
Installing a Cable Gland
1. Slide the sealing nut over the cable (without the RJ45 connector attached to the end).
2. Slide the clamping ring over the cable.
3. Using a crimping tool, attach the shielded RJ45 connector to the end of the cable.
4. Remove the weatherproof cap on the Ethernet port.
5. Insert the RJ45 connector to the Ethernet port.
6. Screw the clamping ring onto the Ethernet port.
7. Screw the sealing nut onto the clamping ring.
Connecting the Power Cable
The W-AP270 Series access point offers two ways to connect the unit to AC power. Two power cord variants are
available and a connector kit that allows you to assemble your own cable if the standard offering does not meet
deployment needs.
The applicable SKUs for these options are:
WARNING: Failure to use the included Ethernet cable glands can lead to connectivity and PoE issues.
NOTE: The cable is not included and must be purchased separately. Purchase a suitable UV-resistant, outdoor rated, CAT 5E or
better RJ45 cable for use with the W-AP270 Series access point.
Sealing Nut Clamping Ring CAT 5E or Better Cable
CAUTION: Installation and service of Dell products should be performed by Professional Installers in a manner that is consistent
with the electrical code in force in the jurisdiction of deployment. In many countries this will require a licensed electrician to
perform this operation. In Japan, this is a Certified Electrician by Ministry of Economy, Trade, and Industry.
NOTE: The W-AP270 Series access point does not ship with any power cables. These are available as accessories and must be
ordered separately.
Table 5
SKUs for Powering Options
Part Number
Description
PC-OD-AC-P-NA
Weatherproof AC power cable(5m), North America version
PC-OD-AC-P-INT
Weatherproof AC power cable(5m), International (EU) version
CKIT-OD-AC-P
Weatherproof connector kit for AC power interface
