background image

Back to Contents Page

  

 

 Camera  

Dell™ Vostro™ A90 Service Manual 

 

  

Removing the Camera 

 

  

Replacing the Camera 

 

 

 

 

 

 

 

Removing the Camera  

 

 

1.

Follow the instructions in 

Before You Begin

.  

 

 

  

2.

Remove the module cover (see 

Removing the Module Cover

).  

 

 

  

3.

Remove the keyboard (see 

Removing the Keyboard

).  

 

 

  

4.

Remove the palm rest (see 

Removing the Palm Rest

).  

 

 

  

5.

Remove the display assembly (see 

Removing the Display Assembly

).  

 

 

  

6.

Remove the display bezel (see 

Removing the Display Bezel

).  

 

 

  

7.

Disconnect the camera cable from the connector.  
 

 

  

8.

Remove the camera board.  
 

 

  

 

Replacing the Camera  

 

 

1.

Align the camera board over the slot holes and gently replace it.  
 

 

  

2.

Reconnect the camera cable to the connector.  
 

 

  

3.

Replace the display bezel (see 

Replacing the Display Bezel

).  

 

 

  

4.

Replace the display assembly (see 

Replacing the Display Assembly

).  

 

 

  

5.

Replace the palm rest (see 

Replacing the Palm Rest

).  

 

 

  

6.

Replace the keyboard (see 

Replacing the Keyboard

).  

 

 

  

7.

Replace the module cover (see 

Replacing the Module Cover

).  

 

 

  

8.

Slide the battery into the battery bay, until it clicks into place and slide the battery-lock latch towards the lock position.  
 

 

CAUTION: 

Before working inside your computer, read the safety information that shipped with your computer. For additional safety best 

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance. 

 

NOTICE: 

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface 

(such as a connector on the back of the computer). 

camera 

camera cable connector 

Summary of Contents for Vostro A90






































Reviews: