Dell Vostro 5880, Service Manual, Page: 27 / 74

Steps
1. Insert the hard drive into the hard-drive cage.
2. Replace the four (6-32) screws that secure the hard drive to the hard-drive cage.
3. Align the hard-drive assembly with the tabs on the chassis.
4. Using the alignment post, align the screw hole on the hard-drive assembly with the screw hole on the chassis.
5. Replace the single (6-32) screw that secures the hard-drive assembly to the chassis.
6. Route the power cable and data cable through the routing guides on the hard-drive assembly and connect the cables to the hard
drive.
Next steps
1. Install the right-side cover .
2. Follow the procedure in After working inside your computer .
Disassembly and reassembly 27