Installing the Battery
1.
Place the battery into its slot until it clicks into place.
2.
Connect the battery cable to its connector on the system board.
3.
Install the base cover.
4.
Follow the procedures in
After Working Inside Your Computer.
Removing the Hard Drive
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove:
a) base cover
b) battery
3.
Lift the hard drive assembly in an upward direction to release it from its compartment on the computer.
4.
Lift and remove the hard drive from the computer..
12
Summary of Contents for Vostro 5470
