Dell Vostro 3582 Service Manual Download

Page: 72 / 83

Remove the

display assembly

Steps

Open the latch and disconnect the power-button board cable from the system board [1].

Peel off the tape that secures the power-button board to the palm rest and keyboard assembly [2].

Remove the screw (M2x3) that secures the power-button board to the palm rest and keyboard assembly [3].

Lift the power-button board, along with the cable, off the palm rest and keyboard assembly [4].

Installing the power button board

Steps

Align and place the power button on the palm rest and keyboard assembly [1].

Replace the screw (M2x2) that secures the power button to the palm rest and keyboard assembly [2].

Affix the tape to secure the power button board to the palm rest and keyboard assembly [3]

Connect the power button board cable to the connector on the system board [4]

Removing and installing components

Summary of Contents for Vostro 3582




















































































Search results

Summary of Contents for Vostro 3582

Reviews:

Related manuals for Vostro 3582

Brands by name

Popular brands

Dell Vostro 3582, Service Manual

Search results

Summary of Contents for Vostro 3582

Reviews:

Related manuals for Vostro 3582

Brands by name

Popular brands