Dell Vostro 3267, Owner'S Manual

Page: 16 / 57

b hard drive assembly
c cooling shroud
d front bezel
e cover
5 Follow the procedure in After Working Inside Your Computer .
Heat sink
Removing the heat sink assembly
1 Follow the procedure in Before working inside your computer .
2 Remove the:
a cover
b bezel
c cooling shroud
d hard drive assembly
e optical drive
3 Follow the steps to remove the heat sink assembly:
a Disconnect the heat sink assembly cable from the system board [1].
b Remove the screws to loosen the processor fan and the heat sink [2].
c Lift the heat sink and remove it from the chassis [3].
Installing the heat sink assembly
1 Place the heat sink assembly in the slot by aligning with the screw holders.
2 Tighten the screws to secure the heat sink assembly to the system board.
3 Connect the heat sink assembly cable to the system board.
4 Install:
a optical drive
b hard drive assembly
c cooling shroud
d front bezel
e cover
16 Removing and installing components