Dell Vostro 3267, Owner'S Manual

Page: 9 / 57

3 Follow the procedures in After Working Inside Your Computer
Front Bezel
Removing the front bezel
1 Follow the procedure in Before working inside your computer .
2 Remove cover .
3 Follow the steps to remove the front bezel:
a Lift the tabs [1], and pull the front bezel [2].
b Lift the front bezel to remove it from the computer [3].
Installing the front bezel
1 Hold the bezel and ensure that the hooks on the tabs snap into the notches on the computer.
2 Rotate the front bezel toward the front of the computer.
3 Press the front bezel until the tabs snap in.
4 Install the cover .
5 Follow the procedure in After Working Inside Your Computer .
Cooling shroud
Removing the cooling shroud
NOTE: Cooling shroud is not a mandatory removal but recommended for easier access to the cables.
1 Follow the procedure in Before working inside your computer .
2 Remove the cover
3 Follow the steps to remove the heat sink fan cover:
a Pry the plastic notches that secure the fan cover in an outward direction [1].
b Remove the fan cover from the heat sink assembly [2].
Removing and installing components 9