Removing and installing components
This section provides detailed information on how to remove or install the components from your computer.
Recommended tools
The procedures in this document require the following tools:
•
Small flat blade screwdriver
•
Phillips # 1 screwdriver
•
Small plastic scribe
•
Hex screwdriver
Cover
Removing the cover
1
Before working inside your computer
2
Follow the steps to remove the cover:
a Remove the 6-32xL6.35 screws that secure the cover to the computer [1].
b Slide the computer cover towards the back of the computer [2].
c Lift and remove the cover from the computer [3].
Installing the cover
1
Slide the cover from the back of the computer, until the latches snap-in.
2
Tighten the 6-32xL6.35 screws to secure the cover.
2
8
Removing and installing components
