Installing the System Board
1.
Align the system board on the computer.
2.
Tighten the screws to secure the system board to the computer.
3.
Connect the following cables to the system board:
a. camera cable
b. display assembly cable
c. system fan cable
d. hard-drive cable
e. hard-drive/optical-drive power cable
f. power-switch cable
g. speaker cable
h. convertor cable
4.
Install:
a.
memory (optional)
b.
WLAN card
c.
heatsink
d.
system-board shield
e.
back cover
f.
optical-disk drive
g.
stand
5.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Display Assembly
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove:
a.
stand
b.
optical-disk drive
c.
back cover
d.
system-board shield
e.
hard drive
f.
speakers
g.
heatsink
h.
system fan
i.
memory
j.
WLAN card
k.
system board
3.
Perform the following steps as shown in the illustration:
a. Disconnect convertor cable [1].
b. Unroute the cable [2].
22
