Installing the hard drive
1
Insert the hard drive into the slot on the computer.
2
Replace the M2.5x5L screws to secure the hard drive assembly to the computer.
3
Affix the hard drive cable on the computer.
4
Connect the hard drive cable to the connector on the hard drive and on the system board.
5
Install the:
a
b
6
Follow the procedure in
After working inside your computer
.
Solid State Drive — optional
Removing the M.2 Solid State Drive — SSD
1
Follow the procedure in
Before working inside your computer
.
2
Remove the:
a
b
3
To remove the SSD:
a Remove the M3x3L screw that secures the SSD to the computer [1].
b Slide and lift the SSD from the computer [2].
Removing and installing components
15
Summary of Contents for Vostro 15-7570
Page 1: ...Dell Vostro 15 7570 Owner s Manual Regulatory Model P71F Regulatory Type P71F001 ...
Page 5: ...Palmrest view 1 Power button Fingerprint reader 2 Keyboard 3 Palmrest 4 Touchpad Chassis 5 ...
Page 6: ...Back view 1 Air vent 2 Air vent Bottom view 6 Chassis ...
Page 25: ...10 The component you are left with is the back cover Removing and installing components 25 ...
