Installing the base cover
1
Align the base cover with the screw holders on the computer.
2
Press the edges of the cover until it clicks into place.
3
Tighten the M2.5x2+3.5 screws to secure the base cover to the computer.
4
Follow the procedure in
After working inside your computer
.
Battery
Removing the battery
1
Follow the procedure in
Before working inside your computer
.
2
Remove the
3
To remove the battery:
a Disconnect the battery cable from the connector on the system board [1].
b Remove the M2x3L screws that secure the battery to the computer [2].
10
Removing and installing components
Summary of Contents for Vostro 15-7570
Page 1: ...Dell Vostro 15 7570 Owner s Manual Regulatory Model P71F Regulatory Type P71F001 ...
Page 5: ...Palmrest view 1 Power button Fingerprint reader 2 Keyboard 3 Palmrest 4 Touchpad Chassis 5 ...
Page 6: ...Back view 1 Air vent 2 Air vent Bottom view 6 Chassis ...
Page 25: ...10 The component you are left with is the back cover Removing and installing components 25 ...