Dell USC, User Manual

Page: 58 / 132

58
USC and USC-LCE Operations
Configuring System Date/Time
To set the date and time for the system:
1
From the USC/USC-LCE
Home
page, select
Hardware Configuration
.
2
In the right pane, select
Configuration Wizards
.
3
Click System Date/Time Configuration .
The default system date and system time shown in USC-LCE is the date
and time reported by the system BIOS.
4
Modify the
System Date
and
Time
(HH:MM:SS AM/PM), as required.
5
Click
Finish
to apply the changes.
6
To return to the Configuration Wizards , click Back or click Cancel to exit.
Configuring iDRAC
To configure iDRAC parameters applicable to the system, such as LAN,
common IP settings, IPv4, IPv6, Virtual Media, and LAN user configuration
use the iDRAC Configuration Wizard.
To configure and manage iDRAC parameters:
1
In the left pane of
Home
page, click
Hardware Configuration
.
2
In the right pane, click Configuration Wizards .
3
Click
iDRAC Configuration
, and configure the following parameters.
• LAN Configuration
• Advanced LAN Configuration
• Common IP Configuration
• IPv4 Configuration
• IPv6 Configuration
• Virtual Media Configuration
• LAN User Configuration
• Summary and Confirmation