Dell USC, User Manual

Page: 63 / 132

USC and USC-LCE Operations
63
The information set during the configuration is erased if iDRAC is reset to the
original defaults or if the iDRAC firmware is updated.
IPv4 Configuration
To set IPv4 configuration:
1
From
IP Configuration
, select
IPV4
, and enable or disable the protocol.
2
Set the RMCP+ encyption key.
3
Specify the IP Address Source .
4
Specify user-configured settings for
Alternate IP Address
.
5
Click Next to proceed.
Table 4-7. Common IP Configuration Attributes
Attribute Description Values
Register iDRAC
Name
Register the iDRAC name with the Domain Name
System (DNS)
Yes or No
iDRAC Name View or edit the iDRAC name used for registering the
DNS. The name string can contain up to 63 printable
ASCII characters.
You can edit the name string when
Register iDRAC
Name is set to No .
Enable or
Disable
Domain Name
from DHCP
iDRAC acquires the domain name from the Dynamic
Host Configuration Protocol (DHCP) server.
If set to
No , you must enter the domain name manually.
Yes or No
Domain Name View or edit the iDRAC domain name used if it is not
acquired from DHCP.
You can specify a domain name when
Domain Name
from DHCP
is set to
No
.
Enable or
Disable
Host Name
String
Specify or edit the host name associated with iDRAC.
The
Host Name string can contain up to 62 ASCII
printable characters.
Enable or
Disable