Dell UltraSharp U3419W User Manual Download Page 64

Page: 64 / 65

│

Troubleshooting

Speakers Specific Problems

High Speed
USB 3.0
interface is
slow

High Speed
USB 3.0
peripherals
working
slowly or not
working at all

• Check that your computer is USB 3.0-

capable.

• Some computers have USB 3.0, USB 2.0, and

USB 1.1 ports. Ensure that the correct USB
port is used.

• Reconnect the upstream cable to your

computer.

• Reconnect the USB peripherals (downstream

connector).

• Reboot the computer.

Wireless
mouse is not
working or
lagging

Do not
respond or
responds
slowly

• Increase the distance between the USB 3.0

peripherals and the wireless USB receiver.

• Position your wireless USB receiver as close

as possible to the wireless mouse.

• Use a USB-extender cable to position the

wireless USB receiver as far away as possible
from the USB 3.0 port.

Specific

Symptoms

What You

Experience

Possible Solutions

No sound
coming from
the speakers

Cannot hear
any sound

• Turn Off the monitor, unplug the monitor

power cord, replug it, and then turn On the
monitor.

• Check the audio cable connection is

connected correctly to the computer Audio
Line Out port.

• Unplug the audio cable from the Audio Line

Out port.

• Reset the monitor to factory settings.

Summary of Contents for UltraSharp U3419W


































































Search results

Summary of Contents for UltraSharp U3419W

Reviews:

Related manuals for UltraSharp U3419W

Brands by name

Popular brands

Dell UltraSharp U3419W, User Manual

Search results

Summary of Contents for UltraSharp U3419W

Reviews:

Related manuals for UltraSharp U3419W

Brands by name

Popular brands