S10
S8
S12
S9
S11
2
DELL U2719D
Use a Philips-head screwdriver to remove one screw
for unlocking the USB board unit, then release the
USB board unit and put it aside.
(No.1 screw size=M3x6, Torque=4
±
0.5
kgfxcm)
S7
1
Tear off 2pcs aluminium foils for unfixing the bracket,
then tear off 1pcs mylar tape, and then tear off 1pcs
acetate tape for unlocking the panel lamp cable
.
Tear 1pcs PVC tape, then use a proper tool to
release the function key cable from the connector,
then pull the function key cable high for releasing the
function key cable as the picture below shown.
Use a Philips-head screwdriver to remove 5pcs
screws for unlocking the front bezel with the
assembled unit.
(No.1~5 screw size=M2x2.7, Torque=3
±0.5
kgfxcm)
3
5
2
4
1
U
.
se a Philips-head screwdriver to remove 2pcs
screws(left and right) for unlocking the front bezel
with the panel module, then disassemble the front
bezel with the unit and put it aside
(No.1~2 Screw size= M3x0.5x4, Torque=3
~4
kgfxcm)
1
2
Tear off the mylar tape on the function key board,
then use
a Philips-head screwdriver to tighten 3pcs
screws for locking the function key board with the
front bezel.
(No.1~3 Screw size= M2x2.4, Torque=1
±0.2
kgfxcm)
1
2
3
