manualshive.com logo in svg

Dell U4323QE, User Manual

Share
Download
Dell U4323QE User Manual Download Page 25

 

About your monitor

       

|    

25

Driver installation

Install the Realtek USB GBE Ethernet Controller Driver available for your system. This 
is available for download at 

https://www.dell.com/support

 under the Drivers & 

Downloads section.

Network (RJ45) data rate through USB-C max speed is up to 1000 Mbps. 

 

NOTE: This LAN port is 1000Base-T IEEE 802.3az compliant, supporting 
Mac Address (Printed on model label) Pass-thru (MAPT), Wake-on-
LAN (WOL) (Supports S3/S4/S5) and UEFI* PXE Boot function[UEFI 
PXE Boot is not supported on Dell Desktop PC’s (except for OptiPlex 
7090/3090 Ultra Desktop)]. These 3 features depend on BIOS settings 
and version of the operating system. Functionality may vary with Non Dell 
PC’s.

*UEFI stands for Unified Extensible Firmware Interface.

RJ45 Connector LED Status:

Left LED

Right LED

LED

Color

Description

Right LED

Amber or Green Speed indicator:

• Amber On - 1000 Mbps
• Green On - 100 Mbps
• Off - 10 Mbps

Left LED

Green

Link/Activity indicator:
• Blinking - Activity on the port.
• Green On - Link is established.
• Off - Link is not established.

 

NOTE: RJ45 cable is not the standard in-box accessory.

Summary of Contents for U4323QE




















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands