Dell U3821DWb User Manual Download Page 30

Page: 30 / 81

│

Setting up the monitor

10.

Remove the cover from the monitor.

Connecting your monitor

WARNING: Before you begin any of the procedures in this section,
follow the

Safety instructions

NOTE: Dell monitors are designed to work optimally with Dell supplied
inbox cables. Dell does not guarantee the video quality and performance
when using non-Dell cables.

NOTE: Route the cables through the cable-management slot before
connecting them.

NOTE: Do not connect all cables to the computer at the same time.

NOTE: The graphics are used for the purpose of illustration only.
Appearance of the computer may vary.

To connect your monitor to the computer:

Turn Off your computer and disconnect the power cable.

Route the power cable through the cable-management slot on the stand and
then connect it to the monitor.

Summary of Contents for U3821DWb


















































































Search results

Summary of Contents for U3821DWb

Reviews:

Related manuals for U3821DWb

Brands by name

Popular brands

Dell U3821DWb, User Manual

Search results

Summary of Contents for U3821DWb

Reviews:

Related manuals for U3821DWb

Brands by name

Popular brands