manualshive.com logo in svg

Dell U3423WE, User Manual

Share
Download
Dell U3423WE User Manual Download Page 5

 

│

  5

Setting the maximum resolution  . . . . . . . . . . . . . . . . . . .  76

Setting the KVM switch . . . . . . . . . . . . . . . . . . . . . . . . . .  77

Setting the Auto KVM  . . . . . . . . . . . . . . . . . . . . . . . . . . .  79

Using the tilt, swivel, vertical extension, 

and slant adjust  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  81

Tilt, swivel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81

Vertical extension . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81

Slant adjust . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  82

Troubleshooting  . . . . . . . . . . . . . . . . . . . . . . . . . . .  83

Self-test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  83

Using the joystick to lock/unlock buttons . . . . . . . . . . . .  84

Locking the power and joystick buttons . . . . . . . . . . . . . . . . . . . .  84

Always On USB Type-C Charging. . . . . . . . . . . . . . . . . . .  85

Common problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  86

Product specific problems . . . . . . . . . . . . . . . . . . . . . . . .  89

Universal Serial Bus (USB) specific problems . . . . . . . . .  90

Speakers Specific Problems  . . . . . . . . . . . . . . . . . . . . . .  92

Regulatory information . . . . . . . . . . . . . . . . . . . . . .  93

FCC notices (U.S. only) and other regulatory 

information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  93

EU product database for energy label and product 
information sheet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  93

Contact Dell  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  94

Summary of Contents for U3423WE































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands