manualshive.com logo in svg

Dell U3423WE, User Manual

Share
Download
Dell U3423WE User Manual Download Page 27

About your monitor 

│

  27

Driver Installation

Install the Realtek USB GBE Ethernet Controller Driver available for your system. 
This is available for download at

 www.dell.com/support

 under the “Driver and 

download” section.

Network (RJ45) data rate via USB-C:

• High Resolution: Up to 480 Mbps

• High Data Speed: Up to 1000 Mbps

NOTE: This LAN port is 1000Base-T IEEE 802.3az compliant, 
supporting Mac Address (Printed on model label) Pass-thru (MAPT), 
Wake-on-LAN (WOL) from standby mode (S3 only) and UEFI* PXE 
Boot function [UEFI PXE Boot is not supported on Dell Desktop PC’s 
(except for OptiPlex 7090/3090 Ultra Desktop)], these 3 features 
depend on BIOS settings and version of the OS. Functionality may vary 
with non-Dell PC’s.

*UEFI stands for Unified Extensible Firmware Interface.

Pin number

Orange

Green

P11

-

+

P12

+

-

P13

N/A

+

P14

N/A

-

Summary of Contents for U3423WE































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands