Dell U2421E User Manual Download Page 52

Page: 52 / 70

| Operating the monitor

Icon Menu and

Submenus

Description

Menu

Select this option to adjust the settings of the OSD, such
as the languages of the OSD, the amount of time the menu
remains on screen, and so on.

Language

Set the OSD display to one of eight languages.
(English, Spanish, French, German, Brazilian Portuguese,
Russian, Simplified Chinese, or Japanese).

Rotation

Rotates the OSD by 0/90/180/270 degrees.
You can adjust the menu according to your display rotation.

Transparency

Select this option to change the menu transparency by
moving the joystick up or down (min. 0/max. 100).

Timer

OSD Hold Time:

Sets the length of time the OSD remains

active after you press a button.
Move the joystick to adjust the slider in 1-second
increments, from 5 to 60 seconds.

Summary of Contents for U2421E







































































Search results

Summary of Contents for U2421E

Reviews:

Related manuals for U2421E

Brands by name

Popular brands

Dell U2421E, User Manual

Search results

Summary of Contents for U2421E

Reviews:

Related manuals for U2421E

Brands by name

Popular brands