background image

Great user manuals database on 

UserManuals.info

Back to Contents Page

  

 

 WWAN Module  

  

Removing the WWAN Module 

 

  

Replacing the WWAN Module 

 

 

 

 

 

 

 

 

 

Removing the WWAN Module  

 

 

1.

Follow the instructions in 

Before You Begin

.  

 

 

  

2.

Remove the battery (see 

Removing the Battery

).  

 

 

  

3.

Remove the base cover (see 

Removing the Base Cover

).  

 

 

  

4.

Remove the hard drive (see 

Removing the Hard Drive

).  

 

 

  

5.

Remove the Mini-Cards if applicable (see 

Removing the Mini-Card

).  

 

 

  

6.

Remove the memory module(s) (see 

Removing the Memory Module(s)

).  

 

 

  

7.

Remove the keyboard (see 

Removing the Keyboard

).  

 

 

  

8.

Remove the palm rest (see 

Removing the Palm Rest

).  

 

 

  

9.

Remove the speaker module (see 

Removing the Speaker Module

).  

 

 

  

10.

Remove the optical drive (see 

Removing the Optical Drive

).  

 

 

  

11.

Lift the black tab to disconnect the WWAN module cable from the connector on the system board.  
 

 

  

12.

Remove the three screws that secure the WWAN module to the computer base 

  

 
 

 

  

13.

Turn the WWAN module over and disconnect the WWAN module cable from the connector on the WWAN module. 

 

WARNING: 

Before working inside your computer, read the safety information that shipped with your computer. For additional safety best 

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance. 

 

CAUTION: 

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal 

surface (such as a connector on your computer).

 

CAUTION: 

To help prevent damage to the system board, remove the main battery (see 

Removing the Battery

) before working inside the 

computer.

 

CAUTION: 

Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™ 

is not covered by your warranty.

screws (3) 

WWAN connector 

Summary of Contents for Studio 1457
















































Reviews: