manualshive.com logo in svg

Dell Studio 1457, Service Manual, Page: 47 / 47

Share
Download
Dell Studio 1457 Service Manual Download Page 47

  

 
 

 

Replacing the WWAN Module  

 

 

1.

Connect the WWAN module cable to the connectors on the WWAN module and the system board.  
 

 

  

2.

Place the WWAN module on the computer base.  
 

 

  

3.

Replace the three screws that secure the WWAN module to the computer base.  
 

 

  

4.

Replace the optical drive (see 

Replacing the Optical Drive

).  

 

 

  

5.

Replace the speaker module (see 

Replacing the Speaker Module

).  

 

 

  

6.

Replace the palm rest (see 

Replacing the Palm Rest

).  

 

 

  

7.

Replace the keyboard (see 

Replacing the Keyboard

).  

 

 

  

8.

Replace the hard drive (see 

Replacing the Hard Drive

).  

 

 

  

9.

Replace the Mini-Cards, if applicable (see 

Replacing the Mini-Card

).  

 

 

  

10.

Replace the memory modules (see 

Replacing the Memory Module(s)

).  

 

 

  

11.

Replace the base cover (see 

Replacing the Base Cover

).  

 

 

  

12.

Replace the battery (see 

Replacing the Battery

).  

 

Back to Contents Page

 

 

 

1 

WWAN module 

2 

WWAN module cable connector 

Summary of Contents for Studio 1457
















































Reviews:

No comments