Dell ST2010 - 20" LCD Monitor, Service Manual

Page: 4 / 76

Service Manual
3
Chapter 1- PRECAUTIONS & SAFETY NOTICES
SAFETY PRECAUTIONS
This monitor is manufactured and tested on a ground principle that a user’s
safety comes first. However, improper used or installation may cause
damage to the monitor as well as to the user.
WARNINGS:
l
This monitor should be operated only at the correct power sources
indicated on the rating label on the rear cover of the monitor. If you’re
unsure the power supply in your residence, consult your local dealer or
Power Company.
l
Use only the specified power cord that comes with this monitor.
l
Do not try to repair the monitor by yourself, as it contains no
user-serviceable parts. This monitor should only be repaired by a
qualified technician.
l
Do not remove the monitor cabinet. There is high-voltage parts inside
that may cause electric shock to human bodies.
l
Stop using the monitor if the cabinet is damaged. Have it checked by a
service technician.
l
Put your monitor only in a lean, cool, dry environment. If it gets wet,
unplug the power cable immediately and consult your closed dealer.
l
Always unplug the monitor before cleaning it. Clean the cabinet with a
clean, dry cloth. Apply non-ammonia based cleaner onto the cloth, not
directly onto the class screen.
l
Do not place heavy objects on the monitor or power cord.
PRODUCT SAFETY NOTICE
Many electrical and mechanical parts in this chassis have special safety
visual inspections and the protection afforded by them cannot necessarily be
obtained by using replacement components rated for higher voltage, wattage,
etc. Before replacing any of these components read the parts list in this
manual carefully. The use of substitute replacement parts, which do not have
the same safety characteristics as specified in the parts list, may create shock,
fire, or other hazards.
SERVICE NOTES
l
When replacing parts on circuit boards, clamp the solder wires around
terminals before soldering.
l
Keep wires away from high voltage, high temperature components and
sharp edges.
l
Keep wires in their original position so as to reduce interference.
l
Adjustment of this product please refers to the user’ manual.
l
Use Pb free solder wire for circuit board preparation.