background image

Dell™ 

SP2009W Flat Panel Monitor User's Guide 

Notes, Notices, and Cautions 

Information in this document is subject to change without notice. 

© 2008 Dell Inc. All rights reserved.

 

Reproduction in any manner whatsoever without the written permission of Dell Inc.

 

is strictly forbidden. 

Trademarks used in this text:

 DELL and 

the

 DELL

 logo are trademarks of Dell Inc;  

Microsoft, Windows, 

a n d

 Windows Vista 

are either registered trademarks or trademarks of 

Microsoft Corporation in the United States and/or other countries; 

ENERGY STAR

 is a registered trademark of the U.S. Environmental Protection Agency. As an ENERGY STAR partner, 

Dell Inc. has determined that this product meets the ENERGY STAR guidelines for energy efficiency. 

Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any 
proprietary interest in trademarks and trade names other than its own. 

Model SP2009Wc 

 

May 2008  Rev. A00

 

 

 

 

 

About Your Monitor

 

Setting Up the Monitor

 

Operating the Monitor

 

Troubleshooting 

 

Appendix

 

 

NOTE: 

A NOTE indicates important information that helps you make better use of your computer.

NOTICE: 

A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid the problem.

 

CAUTION: 

A CAUTION indicates a potential for property damage, personal injury, or death.

Summary of Contents for SP2009W



































Reviews: